192.168.1.1 Won’t Work & unable Log in Netgear WiFi (Solved)

---

The Netgear router easily connected to the modem with the help of the Ethernet cable. You have to configure the router using IP address 192.168.1.1. But if 192.168.1.1 won’t work and you unable to log in Netgear router, then what will you do.

Here, you will get to know how to solve the 192.168.1.1 won’t work & not able to Login Netgear router problem using the tips and solutions. But first, let’s see possible reasons of mentioned problem;

Reasons:

• The Ethernet cable can be loose, damaged, or cut, which connects the router and modem.
• The IP address and URL can be wrong, typed on the address bar of web browser.
• The browser can outdated and you can face trouble like 192.168.1.1 won’t work and you are not able to login Netgear router.
• Router and modem or any other networking device placed on a location surrounded by electronic devices.

Now, let’s see how to solve this 192.168.1.1 won’t work and you are not able to login Netgear router problem.

Solution: 192.162.1.1 Not Working

Check Hardware

If the cable that is connecting the hardware of router and modem is damaged or cut, then you must replace the Ethernet cable. Then, you must also check the connecting ports, which should be LAN port of the modem and WAN port of the Netgear router.

Choose Another Location

The optimal location of the WiFi router and the modem plays an important role in network reliability in your house. The location must be far from the electronic devices in your house.

Reboot Netgear Router

Rebooting the router will refresh its settings. To start the restart process, you just have to follow some steps given below;

• First, you can restart the device by pressing the power button twice.
• Second, you can reboot the device by plugging out and in the power cord in to wall socket.

Use Updated Browser

What if the browser is outdated and 192.168.1.1 not working, then you have to use the updated browser. To updated the browser you just have to use these below given steps;

• Go to the Browser Settings> About> and then click on the UPDATE button

At Last Reset Router

Resetting the WiFi router will delete or cleared out all the data and settings. You can use the reset process to dispel the ‘192.168.1.1 won’t work and you are not able to login Netgear router’ problem. Just take a look how to reset the router;

• Find the router RESET pinhole button.
• It will be at the back of the WiFi router.
• Just use the pin or a sharp object to long press the button.
• After pressing the button, the reset process will start.

After resetting the router, you should perform Netgear router setup again and re-configure the settings.

The End Section

Here, you have read the reasons why 192.168.1.1 won’t work and you are not able to login Netgear router. We have also provided simple to perform troubleshooting tips and solutions to fix this mentioned problem.