Can’t Access EX6400v1 Setup with Mywifiext (FIXES)

---

The problem the user having is the mywifiext interface not opening, and user wants to set it up. Here, you will get to know the reasons of the issue, solutions to fix the issues and how to setup the extender with mywifiext.net.

At first, you have to know why you can’t access EX6400v1 setup with mywifiext, and then you will get to learn the solutions;

Reasons

• The first reason why you are not getting into the GUI is that you are not connect with the extender network Netgear_ext.
• Getting network interruptions into the connection is also a reason of can’t access EX6400v1 setup with mywifiext.
• If the router is not link with the extender device then you will get the trouble with the same problem.

Now have a look at the solutions given below here;

Solutions

There are major solutions that you will learn are used by most of the users to fix the issues like mentioned above.

Make Sure You Connect to Extender Network

The setup of any device can be done from its IP address or the URL that is given on the label or in the user manual of the device. In the case of the extender, you should connect with its own network that is Netgear_Ext. If you are not, then the URL will not respond

Ensure Extender Connects On Optimal Location

The extender must be linked with the internet devices on the optimal locations in your home. It must far from the electronic devices like microwave oven or microphones. The reason behind it is signal interruptions.

Make Sure Extender Connected to Router

Router to extender connection is the most important link which works to provide expanded network and signals. You must check that the router is connected to the extender, and if cable is used to link then check that too. Also you must ensure that the extender is not plug in wall socket far from the router.

Reboot Netgear EX6400v1 WiFi Extender

The other solution to fix the ‘can’t access EX6400v1 setup with mywifiext’ issue is to reboot the device network. To reboot there are two ways;

First:Plug out the extender from the wall socket and plug it in again to restart the device.

Second:The other way to restart the device is to press the power button for two times.

Reset It Last Option to Solve Issue

Reset will be the last option to fix the issue, let’s have a look how to hard reset the EX6400v1 device;

• 1.Find the reset button on the device.
• 2.Press and hold it for 7 seconds.
• 3.Release it to start the reset process.

There can be wrong steps that you are using to access the extender Genie interface, have a close look on them;

How to Reach Mywifiext GUI?

• 1.Connect a computer to the extender network via cable or SSID details.
• 2.Then use web browser that is of latest update and search the URL mywifiext.net (Windows) or mywifiext.local (for Mac).
• 3.You will reach to the interface login page where, you have to enter the username and password.
• 4.The admin username and password are given on the device label or user manual.
• 5.Just add and click on the Login button, now, you can easily manage or setup the settings of the extender

Here, you must configure the extender network, change WiFi password, adjust admin password, and update Netgear firmware version.

End Conclusion

Here, you have seen the reasons why you can’t access EX6400v1 setup with mywifiext and how to fix it using solutions.