The extenders are simple to connect with your home router, but if it won’t connect with your WiFi. Here you will get to know fixes for the Netgear EX6100 extender won’t connect to WiFi with iPhone technical issue. So, let’s start:
The issue can resolve if you refresh the settings and hardware once. To do that you can reboot the device. You just have to turn off and turn on the extender. There are two ways to do that:
The reason can be wrong setting adjustments, so to solve re-configure the device. You can adjust the settings by your phone or computer.
The extender connects to the router with the help of WPS method as well as via cable (LAN). You should make sure that the extender is connected to the router. If you are using the WPS, make sure that extender connects near to the router. But if you are using the cable, then use the non-damaged cables.
Only in some cases the reset solutions are used to fix the issue. It is easy to reset the device with hitting a button.
To reset the device and clear all data from the extender, you must find the RESET button. Press the button and hold the button for 10 seconds. The process will complete in some minutes.
After the process, you have to reconfigure the device from your phone or computer and reconnect. Also, update the Netgear firmware after this reset process.
From the post, you have learned about how to fix the Netgear EX6100 Extender won’t connect to WiFi with iPhone.
Tags: Netgear extender setup, Netgear wifi extender setup, WiFi Extender
