EX6200v2 Mywifiext Not Working After Update (Solved)

---

The Netgear EX6200v2 range extender is a device use to extend your home router speed and reliability. It provides fastest AC1200 dual Band WiFi speed in to your home. With which you can connect to Netgear_EXT network after setup. But some users are facing the problem like ‘cannot login to mywifiext after firmware upgrade on EX6200v2’ issue.

Here, you will get to know and learn about how to solve this mentioned problem using simple troubleshooting tips.

Troubleshoot Can’t Log in GUI After Firmware Update

1. Check Extender Connected to Router

You have to check that the extender is connected to the home router and receiving internet or not. If the extender is not getting any signals, then you have to check out the physical connection.

If you are using the Ethernet cable to connect, then make sure the cable is not damaged.

If you are using the WPS method to establish connection, then make sure extender is plugged within to the router reach.

2. Check EX6200v2 Updated or Not

Extender can be updated or not, to check the firmware is installed or not go to the interface login or phone app. Also, if after firmware version download the extender didn’t restart, then you have to restart it to install the newest version.

• Find the power button and press it twice.
• Unplug the extender and plug it again to wall socket.

3. Double Check Interface Login URL

The other reason you are facing the problem is entering the wrong login URL in the address bar of the web browser. Make sure it is mywifiext.net or you can use the IP address 192.168.1.250.

Also make sure the computer or laptop is connected to the extender network. while logging in to the interface, disable the Antivirus of the computer and Ad-Blocker of the web browser.

4. Use Another Laptop or Computer to Login

If still you are facing the same issue mentioned above, then you should use another internet device like computer or laptop. Use the LAN cable to connect the computer to the extender instead of using the SSID details.

5. Reboot EX6200v2 Extender to Dispel Issue

By restarting the Netgear EX6200v2 WiFi range extender user can dispel the ‘cannot login to mywifiext after firmware upgrade on EX6200v2’ issue. There are two methods that you can use to reboot the device;

• Find the power button on the extender, hit it for two times. First time, by pressing the button will turn it off and second time, it will reboot.
• The second method to restart the device is plug out extender from the wall socket and plugs it in again.

6. Update Extender via App and Try to Login

If the problem is not solved yet, then install Netgear firmware update of EX6200v2 device again with the help of your phone using the Nighthawk app.

• Open the Nighthawk app in your mobile device.
• Go to the MENU option and select the Firmware tab.
• Just tap on the UPDATE button and after downloading the firmware your device will restart.

End Section Lines

Here, you have seen and learned how to solve the issue ‘cannot login to mywifiext after firmware upgrade on EX6200v2’ issue.