Netgear Range Extender Using Mywifiext

---

There are simple and easy configuration methods to setup an extender in home. One of them is using computer or laptop. As you know or for more information the Netgear routers works on IP 192.168.1.1 which also is admin address, which you can reach to the interface. Also, netgear extender works on 192.168.1.250, with which you can reach to its settings. You can use the URL as well to setup Netgear range extender using mywifiext GUI interface. Let’s connect it to your router first;

WPS button is given on the extender side panel which help user to connect it wirelessly. You just have to press the extender WPS button as well as router WPS button. Then, automatically both of them connect and you can configure the settings.

Netgear Extender Setup via Mywifiext

There are few steps to configure the extender (setup) with the help of computer web browser, just have a look;

• You have to connect your internet device like computer or laptop to the extender network that is Netgear_ext.
• You can do this with the help of Ethernet cable to via SSID credentials (username and password).
• 3Then, you have to open the web browser in computer and enter URL mywifiext.net or IP address 192.168.1.250.
• 4You will get to the login page of the interface window, where you have to enter the admin username and password.
• If you are setting up the extender first time then, you can use the default admin credentials given on the label or user manual.
• Just enter and log in to the interface window, where you can change settings like frequency channels, change WiFi password, and admin password.

How to Update Extender via Mywifiext?

Yes, you can also update the extender firmware with the interface window. You have to just download the latest firmware file from the Netgear support site and then access mywifiext interface on your device (computer or laptop). Go in to the Settings > Administration > Netgear Firmware tab > paste the downloaded file > click on the Install button.

How to Change WiFi Password via Mywifiext?

There are simple steps to change the WiFi password and SSID username with which you can connect internet devices to extender. At first, you have to access the GUI interface in your internet device (web browser). Then you have to find and open the Wireless network in to settings of the GUI. In that tab, you will find the current WiFi password and username. Just edit it and enter new credentials. To apply them you must click on the SAVE button.

How to Change Admin Password via Mywifiext?

The Admin password can also be changed with the help of the interface in your computer. At first, you have to access the GUI interface in your internet device (web browser). Then you have to find and open the Settings, select the Admin Settings, and enter the username and password. then SAVE them to apply.

Troubleshooting Tips (Mywifiext)

Reboot WiFi range Extender

To reboot the device, you just have to cut off the power of the Netgear WiFi range Extender. There are two ways

• Plug out the adapter and plug it again in to the power outlet.
• Press the power button for two times which restart the device.

Reset WiFi range Extender

The end solution for any issue is resetting the device. Just follow some steps;

Press and hold the reset button (given on the back of the device) > you have to hold it for 7-10 seconds > then after some time, resetting will be completed > after that, you must reconfigure the settings of the devices.

To Reconfigure Just Follow Some Steps:

• Open the web browser in computer and enter URL mywifiext.net or IP address 192.168.1.250.
• You will get to the login page of the interface window, where you have to enter the admin username and password.
• If you are setting up the extender first time then, you can use the default admin credentials given on the label or user manual.

Just enter and log in to the interface window. Now, you can easily adjust all the settings again in for your extender.