Why is Netgear_Ext Not Showing on My Network List?

---

Don’t you just hate it when your extender’s SSID refuses to appear on the network list? Well, we understand what you and many others who are facing the same issue are going through. So, ease out the worry lines on your forehead, sit back, and relax. By the time you reach the end of this post, you will surely get to know how to troubleshoot the Netgear_ext not showing on network list issue. So, read on.

Reasons Why Netgear_Ext is Not Appearing on Network List

There can be several reasons why your Netgear wireless extender’s SSID is not ready to display itself on the network list. We have shed light on some of the most common ones here:

1. Your internet connection is not strong.
2. You haven’t properly performed Netgear extender setup.
3. The network connection of your device is disabled.
4. The firmware of your Netgear extender is not up-to-date.
5. The distance between your Netgear extender and wireless router is too much.

Now that you are aware of the reasons behind the Netgear_ext not showing on the network list issue, troubleshooting it will be a piece of cake for you. However, if you get stuck at any point while trying to fix it, feel free to get in touch with our technical experts for instant help!

Fixed: Netgear_Ext Not Showing on Network List

a) Contact Your Internet Service Provider

As mentioned above, one of the major reasons why you are struggling with the Netgear_ext not showing on network list issue is because of a weak internet connection.

There is a possibility that Internet Service Provider is at fault here. To confirm the same, get in touch with him. If he agrees that the issue is from his side, ask him to get it fixed.

b) Verify the Ethernet Connection

If the reason behind a weak internet connection isn’t your ISP, then chances are that the connection between your Netgear extender and router is unstable. That might be due to a faulty Ethernet cable.

To help you troubleshoot the issue, it is recommended that you replace the Ethernet cable with a new one.

c) Perform Netgear Firmware Update

Updating the firmware of your Netgear wireless range extender can also help you troubleshoot the issue you are currently experiencing.

In order to update the firmware of your device, access the Netgear extender login page, and follow the guidelines mentioned below:

1. When prompted, enter the default login credentials.
2. Click Log In.
3. Once on the Netgear Genie dashboard, go to Settings.
4. Under Maintenance, select Firmware Update.
5. Your device will check for available firmware updates.
6. If any new firmware update is available, then follow the on-screen instructions.

In this way, you will be able to perform Netgear extender firmware update.

d) Perform Netgear Extender Setup

If nothing has worked for you so far, then it is probably because you haven’t set up your extender properly. Thus, configure your device correctly this time. But, before you do that, perform factory default reset.

Here is how you can restore your Netgear wireless range extender to the factory default settings:

• Locate the Reset button on your range extender.
• Once located, carefully press it using a pointed object.
• Wait for some time.

Once you are done resetting your Netgear range extender, reconfigure it using any of the following methods:

1. Via WPS Method
2. Using Manual Method
3. Using Nighthawk App

Need Our Help?

Let us hope that after following the aforementioned troubleshooting steps, you will be able to get rid of the Netgear_ext not showing on network list issue. However, if you still going nuts due to the same, then waste no more time getting in touch with our well-versed technicians. They will surely be of some help to you.